Industrial Construction

This service suits manufacturers and logistics operators building a new facility, businesses expanding an existing industrial site with additional floor area or a new production line, and clients converting a shell structure into an operational facility with the services, flooring and fit-out specific to their process. It also suits clients who need a phased build, where part of a facility must become operational while construction continues on later phases, which requires deliberate sequencing rather than an all-or-nothing handover.

Industrial projects begin with an operational brief: what the facility needs to produce, store or process, expected floor loads, vehicle and material movement patterns, and any specific utility requirements. Structural design follows from this brief, sized for actual loads and spans rather than a standard residential or commercial assumption. Services corridors and utility routing are planned early, since industrial facilities typically carry more extensive and heavier services than residential or commercial buildings. Utility capacity planning deserves particular attention for industrial projects, since a facility's actual power draw at full operational capacity, once machinery, lighting, HVAC and any process-specific equipment are all running, can be substantially higher than what a generic commercial estimate would suggest. We work with the client's equipment specifications, where available, or reasonable projections based on the intended process, to size incoming power capacity, transformer requirements where relevant, and internal distribution, rather than sizing utilities to the building's floor area alone, which is a common and costly under-specification in industrial projects that later need expensive capacity upgrades once the facility is operational and the actual load becomes apparent.

Phased delivery

Where a client needs to begin operations before full construction is complete, we plan a phased handover, completing and commissioning one section while construction continues elsewhere, with clear boundaries and safety separation between the operational and active-construction zones.

Industrial structural work is checked at the same rigour as any RCC project, footing, column and beam stages verified against drawings, with additional attention to floor flatness and loading verification given the equipment these floors will carry. Services are tested and commissioned before handover, and any phased sections are formally signed off before operations begin in that area. Documentation handed over at the close of an industrial project includes as-built structural and services drawings, equipment foundation records, and test certificates for utilities and fire systems, since an operational facility's maintenance team will need to reference this information for years after our own involvement ends, often long after the people who supervised construction have moved on to other projects.